Shanghai Maxsuner Electronics Co., Ltd.
Main products:rc helicopter
Contact Us
  • Contact Person : Ms. Zeng Viki
  • Company Name : Shanghai Maxsuner Electronics Co., Ltd.
  • Tel : 86-21-50706031
  • Fax : 86-21-50706031
  • Address : Shanghai,Shanghai,Room 901, Jinmao Garden, #2515 Pudong Ave, Pudong New District, Shanghai
  • Country/Region : China
  • Zip : 201206

ESKY Lipo Battery EK1-0181 7.4V 800mAh for Lama V3 lama V4

ESKY Lipo Battery EK1-0181 7.4V 800mAh for Lama V3 lama V4
Product Detailed
ESKY Lipo Battery EK1-0181 7.4V 800mAh for Lama V3 lama V4

 For:RC Helicopter Plane Boat Car,Especially the ESKY 300 Honey bee LAMA V3 V4 E037 KOB E035 helicopter.



Output:7.4V(2S1P)800mAhDimension:about 55×30×14 mm (each size may have a little difference when produced )Weight: about 45g This Li-poly battery features high efficient and high discharge, use a inspection machine to match packs, suitable for ESKY LAMA series and other professional model airplanes, cars, and guns. Max Continuous Discharge: 10C, Burst Discharge: 20C. Normal operating temperature is approx. 40-65°C(within 80% of rated discharge). Max. temperature: 80°C.

NOTE:When using high energy Li-poly Battery, please do not over-discharge, over-charge batteries, or result over-high temperature. Discharging capacity can't exceed 80% of the max capacity after full charging to ensure a good cycle performance. Recommend to full charge a brand new battery before using and only discharge the battery 50% for first 5 times to make a good efficiency of the battery. Please make it a habit to always count time for flight, or please set a low voltage protection on ESC (Cell voltage after stopping using can not lower than 3.2V). Do not use the battery at insufficient of voltage.Do not expose batteries to sunshine or store/ charge batteries at the temperature up to 35°C in a airtight car. The environment high temperature could cause the damage or the danger of burst. If the battery becomes hot while high current discharging or flying, please do not charge the battery immediately. Wait to cool down(about 20 mins), then inspect to recharge. If against follow the original factory using rules, possibly cause the battery to inflate or any dangerous accident happens.

1.  Quantity: 1PC

2.  100% Brand New!

ESKY Lipo Battery EK1-0181 7.4V 800mAh for Lama V3 lama V4

Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.